View AZ100LVEL33_188054.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..com
ARIZONA MICROTEK, INC.
AZ10LVEL33 AZ100LVEL33
ECL/PECL /4 Divider FEATURES
* * * * * * * * PACKAGE Green / RoHS Compliant / Lead (Pb) Free package available Operating Range of 3.0V to 5.5V 470ps Propagation Delay 4.0GHz Toggle Frequency Internal Input Pulldown Resistors Direct Replacement for ON Semiconductor MC10EL33, MC100EL33, and MC100LVEL33 Transistor Count = 91 Devices IBIS Model Files Available on Arizona Microtek Web Site
MLP 8 (2x2) Green / RoHS Compliant / Lead (Pb) Free MLP 16 (3x3) SOIC 8 SOIC 8 TSSOP 8 TSSOP 8
1 2 3
PACKAGE AVAILABILITY PART NUMBER
AZ100LVEL33NG
MARKING
C3G AZM L33 AZM10 LVEL33 AZM100 LVEL33 AZT LV33 AZH LV33
NOTES
1,2
AZ10/100LVEL33L AZ10LVEL33D AZ100LVEL33D AZ10LVEL33T AZ100LVEL33T
1,2 1,2,3 1,2,3 1,2,3 1,2,3
Add R1 at end of part number for 7 inch (1K parts), R2 for 13 inch (2.5K parts) Tape & Reel. Date code format: "Y" or "YY" for year followed by "WW" for week. Date code "YWW" or "YYWW" on underside of part.
DESCRIPTION
The AZ10/100LVEL33 is an integrated /4 divider. The RESET pin is asynchronous and clears the output (Q Low, Q High) on the rising edge. Upon power-up, the internal flip-flop will be in a random logic state. RESET allows for the synchronization of multiple LVEL33's in a system. The LVEL33 provides a VBB output for single-end use or a DC bias reference for AC coupling to the device. For single-ended input applications, the VBB reference should be connected to one side of the CLK/ CLK differential input pair. The input signal is then fed to the other CLK/ CLK input. The VBB pin can support 1.0mA sink/source current. When used, the VBB pin should be bypassed to ground via a 0.01F capacitor. NOTE: Specifications in the ECL/PECL tables are valid when thermal equilibrium is established. LOGIC DIAGRAM PIN DESCRIPTION PIN CLK, CLK RESET VBB Q, Q VCC VEE FUNCTION Clock Inputs Asynchronous Reset Reference Voltage Output Data Outputs Positive Supply Negative Supply
RESET R Q /4 CLK CLK VBB Q
1630 S. STAPLEY DR., SUITE 127 * MESA, ARIZONA 85204 * USA * (480) 962-5881 * FAX (480) 890-2541 www.azmicrotek.com
AZ10LVEL33 AZ100LVEL33
Absolute Maximum Ratings are those values beyond which device life may be impaired.
Symbol VCC VI VEE VI IOUT TA TSTG Characteristic PECL Power Supply (VEE = 0V) PECL Input Voltage (VEE = 0V) ECL Power Supply (VCC = 0V) ECL Input Voltage (VCC = 0V) Output Current --- Continuous --- Surge Operating Temperature Range Storage Temperature Range Rating 0 to +8.0 0 to +6.0 -8.0 to 0 -6.0 to 0 50 100 -40 to +85 -65 to +150 Unit Vdc Vdc Vdc Vdc mA C C
10K ECL DC Characteristics (VEE = -3.0V to -5.5V, VCC = GND)
Symbol VOH VOL VIH VIL VBB IIH IIL IEE 1. Characteristic
1
Output HIGH Voltage Output LOW Voltage1 Input HIGH Voltage Input LOW Voltage Reference Voltage Input HIGH Current Input LOW Current CLK, CLK -150 RESET 0.5 Power Supply Current 27 33 Each output is terminated through a 50 resistor to VCC - 2V.
Min -1080 -1950 -1230 -1950 -1430
-40C Typ
Max -890 -1650 -890 -1500 -1300 150
Min -1020 -1950 -1170 -1950 -1380
0C Typ
Max -840 -1630 -840 -1480 -1270 150
Min -980 -1950 -1130 -1950 -1350
25C Typ
Max -810 -1630 -810 -1480 -1250 150
Min -910 -1950 -1060 -1950 -1310
85C Typ
Max -720 -1595 -720 -1445 -1190 150
Unit mV mV mV mV mV A A
-150 0.5 27 33
-150 0.5 27 33
-150 0.5 27 33
mA
10K LVPECL DC Characteristics (VEE = GND, VCC = +3.3V)
Symbol VOH VOL VIH VIL VBB IIH IIL IEE 1. 2. Characteristic
1,2
Output HIGH Voltage Output LOW Voltage1,2 Input HIGH Voltage1 Input LOW Voltage1 Reference Voltage1 Input HIGH Current Input LOW Current CLK, CLK -150 -150 -150 RESET 0.5 0.5 0.5 Power Supply Current 27 33 27 33 For supply voltages other that 3.3V, use the ECL table values and ADD supply voltage value. Each output is terminated through a 50 resistor to VCC - 2V.
Min 2220 1350 2070 1350 1870
-40C Typ
Max 2410 1650 2410 1800 2000 150
Min 2280 1350 2130 1350 1920
0C Typ
Max 2460 1670 2460 1820 2030 150
Min 2320 1350 2170 1350 1950
25C Typ
Max 2490 1670 2490 1820 2050 150
Min 2390 1350 2240 1350 1990
85C Typ
Max 2580 1705 2580 1855 2110 150
Unit mV mV mV mV mV A A
-150 0.5 27 33 27 33
mA
10K PECL DC Characteristics (VEE = GND, VCC = +5.0V)
Symbol VOH VOL VIH VIL VBB IIH IIL IEE 1. 2. Characteristic
1,2
Output HIGH Voltage Output LOW Voltage1,2 Input HIGH Voltage1 Input LOW Voltage1 Reference Voltage1 Input HIGH Current Input LOW Current CLK, CLK -150 -150 -150 RESET 0.5 0.5 0.5 Power Supply Current 27 33 27 33 For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value. Each output is terminated through a 50 resistor to VCC - 2V.
Min 3920 3050 3770 3050 3570
-40C Typ
Max 4110 3350 4110 3500 3700 150
Min 3980 3050 3830 3050 3620
0C Typ
Max 4160 3370 4160 3520 3730 150
Min 4020 3050 3870 3050 3650
25C Typ
Max 4190 3370 4190 3520 3750 150
Min 4090 3050 3940 3050 3690
85C Typ
Max 4280 3405 4280 3555 3810 150
Unit mV mV mV mV mV A A
-150 0.5 27 33 27 33
mA
April 2007 * REV - 9
www.azmicrotek.com 2
AZ10LVEL33 AZ100LVEL33
100K ECL DC Characteristics (VEE = -3.0V to -5.5V, VCC = GND)
Symbol VOH VOL VIH VIL VBB IIH IIL IEE 1. Characteristic
1
Output HIGH Voltage Output LOW Voltage1 Input HIGH Voltage Input LOW Voltage Reference Voltage Input HIGH Current Input LOW Current CLK, CLK -150 RESET 0.5 Power Supply Current 27 33 Each output is terminated through a 50 resistor to VCC - 2V.
Min -1085 -1830 -1165 -1810 -1380
-40C Typ -1005 -1695
Max -880 -1555 -880 -1475 -1260 150
Min -1025 -1810 -1165 -1810 -1380
0C Typ -955 -1705
Max -880 -1620 -880 -1475 -1260 150
Min -1025 -1810 -1165 -1810 -1380
25C Typ -955 -1705
Max -880 -1620 -880 -1475 -1260 150
Min -1025 -1810 -1165 -1810 -1380
85C Typ -955 -1705
Max -880 -1620 -880 -1475 -1260 150
Unit mV mV mV mV mV A A
-150 0.5 27 33
-150 0.5 27 33
-150 0.5 31 37
mA
100K LVPECL DC Characteristics (VEE = GND, VCC = +3.3V)
Symbol VOH VOL VIH VIL VBB IIH IIL IEE 1. 2. Characteristic
1,2
Output HIGH Voltage Output LOW Voltage1,2 Input HIGH Voltage1 Input LOW Voltage1 Reference Voltage1 Input HIGH Current Input LOW Current CLK, CLK -150 -150 -150 RESET 0.5 0.5 0.5 Power Supply Current 27 33 27 33 For supply voltages other that 3.3V, use the ECL table values and ADD supply voltage value. Each output is terminated through a 50 resistor to VCC - 2V.
Min 2215 1470 2135 1490 1920
-40C Typ 2295 1605
Max 2420 1745 2420 1825 2040 150
Min 2275 1490 2135 1490 1920
0C Typ 2345 1595
Max 2420 1680 2420 1825 2040 150
Min 2275 1490 2135 1490 1920
25C Typ 2345 1595
Max 2420 1680 2420 1825 2040 150
Min 2275 1490 2135 1490 1920
85C Typ 2345 1595
Max 2420 1680 2420 1825 2040 150
Unit mV mV mV mV mV A A
-150 0.5 27 33 31 37
mA
100K PECL DC Characteristics (VEE = GND, VCC = +5.0V)
Symbol VOH VOL VIH VIL VBB IIH IIL IEE 1. 2. Characteristic
1,2
Output HIGH Voltage Output LOW Voltage1,2 Input HIGH Voltage1 Input LOW Voltage1 Reference Voltage1 Input HIGH Current Input LOW Current CLK, CLK -150 -150 -150 RESET 0.5 0.5 0.5 Power Supply Current 27 33 27 33 For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value. Each output is terminated through a 50 resistor to VCC - 2V.
Min 3915 3170 3835 3190 3620
-40C Typ 3995 3305
Max 4120 3445 4120 3525 3740 150
Min 3975 3190 3835 3190 3620
0C Typ 4045 3295
Max 4120 3380 4120 3525 3740 150
Min 3975 3190 3835 3190 3620
25C Typ 4045 3295
Max 4120 3380 4120 3525 3740 150
Min 3975 3190 3835 3190 3620
85C Typ 4045 3295
Max 4120 3380 4120 3525 3740 150
Unit mV mV mV mV mV A A
-150 0.5 27 33 31 37
mA
April 2007 * REV - 9
www.azmicrotek.com 3
AZ10LVEL33 AZ100LVEL33
AC Characteristics (VEE = -3.0V to -5.5V; VCC = GND or VEE = GND; VCC = +3.0V to +5.5V)
Symbol fmax tPLH / tPHL tRR tskew VPP (AC) Characteristic Maximum Toggle Frequency Propagation Delay CLK, CLK to Q/Q RESET to Q/Q Reset Recovery Within-Device Skew Min 3.4 360 310 300 -40C Typ 4.0 450 460 540 610 20 Max Min 3.8 320 340 300 0C Typ 4.0 460 460 550 580 20 Max Min 3.8 380 360 300 25C Typ 4.0 470 460 560 560 20 Max Min 3.8 400 380 300 85C Typ 4.0 490 480 580 580 20 Max Unit GHz ps ps ps mV V ps
Input Swing1 150 1000 150 1000 150 1000 150 1000 Common Mode Range2 VCC VEE + VCC VEE + VCC VEE + VCC VEE + 1.2 0.4 1.1 0.4 1.1 0.4 1.1 0.4 VCMR Vpp < 500mV 1.4 0.4 1.3 0.4 1.3 0.4 1.3 0.4 Vpp 500mV Output Rise/Fall Times tr / t f 100 260 100 260 100 260 100 260 Q/Q (20% - 80%) 1. VPP is the peak-to-peak differential input swing for which AC parameters are guaranteed. 2. VCMR is defined as the range within which the VIH level may vary, with the device still meeting the propagation delay specification. The VIL level must be such that VPP is within the differential input swing range specified.
CLK RESET Q
Figure 1. Timing Diagram
April 2007 * REV - 9
www.azmicrotek.com 4
AZ10LVEL33 AZ100LVEL33
PACKAGE PINOUTS TOP VIEW
AZ10/100LVEL33L
RESET 16 NC 1 2 3 4
5 6 7 8
AZ100LVEL33N
VCC 13
12 11 10 9
NC 15
NC 14
NC Q Q NC
RESET CLK CLK VBB
1 2 3 4
8 7 6 5
VCC Q Q VEE
CLK CLK VBB
MLP16
MLP 8
NC
NC
VEE
10K
100K Mode: Leave the 10K pin open (NC) 10K Mode: Connect the 10K pin to VEE Bottom Center Pad may be left open or tied to VEE. AZ10LVEL33D AZ100LVEL33D AZ10LVEL33T AZ100LVEL33T
Bottom Center Pad may be left open or tied to VEE.
RESET 1
8
VCC
CLK
2
7
CLK
3
SOIC 8 TSSOP 8
Q
6
Q
VBB
4
5
VEE
April 2007 * REV - 9
www.azmicrotek.com 5
AZ10LVEL33 AZ100LVEL33
PACKAGE DIAGRAM SOIC 8
NOTES: 1. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 2. MAXIMUM MOLD PROTRUSION FOR D IS 0.15mm. 3. MAXIMUM MOLD PROTRUSION FOR E IS 0.25mm.
DIM A A1 A2 A3 bp c D E e HE L Lp Q v w y Z
MILLIMETERS MIN MAX 1.75 0.10 0.25 1.25 1.45 0.25 0.36 0.49 0.19 0.25 4.8 5.0 3.8 4.0 1.27 5.80 6.20 1.05 0.40 1.00 0.60 0.70 0.25 0.25 0.10 0.30 0.70 8O 0O
INCHES MIN MAX 0.069 0.004 0.010 0.049 0.057 0.01 0.014 0.019 0.0075 0.0100 0.19 0.20 0.15 0.16 0.050 0.228 0.244 0.041 0.016 0.039 0.024 0.028 0.01 0.01 0.004 0.012 0.028 0O 8O
April 2007 * REV - 9
www.azmicrotek.com 6
AZ10LVEL33 AZ100LVEL33 PACKAGE DIAGRAM TSSOP 8
NOTES: 1. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 2. MAXIMUM MOLD PROTRUSION FOR D IS 0.15mm. 3. MAXIMUM MOLD PROTRUSION FOR E IS 0.25mm.
DIM A A1 A2 A3 bp c D E e HE L Lp v w y Z www.azmicrotek.com 7
MILLIMETERS MIN MAX 1.10 0.05 0.15 0.80 0.95 0.25 0.25 0.45 0.15 0.28 2.90 3.10 2.90 3.10 0.65 4.70 5.10 0.94 0.40 0.70 0.10 0.10 0.10 0.35 0.70 6O 0O
April 2007 * REV - 9
AZ10LVEL33 AZ100LVEL33
PACKAGE DIAGRAM MLP 16
D
2. INDEX AREA (D/2 x E/2)
A D 2 E 2 E
3x e e
B
D2 D2/2 E2/2 E2
2 1
5.
2x 2x
aaa C aaa C TOP VIEW bbb M C A B
16 x b 3. 3x e BOTTOM VIEW
L
ccc C
A
4. 0.08 C SIDE VIEW
A3 C SEATING PLANE
A1
MILLIMETERS
NOTES: 1. DIMENSIONING AND TOLERANCING CONFORM TO ASME T14-1994. 2. THE TERMINAL #1 AND PAD NUMBERING CONVENTION SHALL CONFORM TO JESD 95-1 SPP-012. 3. DIMENSION b APPLIES TO METALLIZED PAD AND IS MEASURED BETWEEN 0.25 AND 0.30 mm FROM PAD TIP. 4. COPLANARITY APPLIES TO THE EXPOSED PADS AS WELL AS THE TERMINALS. 5. INSIDE CORNERS OF METALLIZED PAD MAY BE SQUARE OR ROUNDED
DIM A A1 A3 b D D2 E E2 e L aaa bbb ccc
MIN MAX 1.00 0.80 0.05 0.00 0.25 REF 0.30 0.18 3.10 2.90 1.95 0.25 3.10 2.90 1.95 0.25 0.50 BSC 0.30 0.50 0.25 0.10 0.10
April 2007 * REV - 9
www.azmicrotek.com 8
AZ10LVEL33 AZ100LVEL33
PACKAGE DIAGRAM MLP 8 2x2mm
Pin 1 Dot By Marking 2.0000.050
2.0000.050
MLP 8 (2x2mm)
TOP VIEW
0.3500.050 0.2500.050 8 7 0.500 bsc 6 5 1
Pin 1 Identification R0.100 TYP
2 1.2000.050 exp. pad 3 4 0.6000.050 exp. pad
BOTTOM VIEW
1.750 Ref.
0.7500.050 0.000-0.050
1
2
34 0.2030.025
SIDE VIEW
Note: All dimensions are in mm
April 2007 * REV - 9
www.azmicrotek.com 9
AZ10LVEL33 AZ100LVEL33
Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice. Arizona Microtek, Inc. makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Arizona Microtek, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Arizona Microtek, Inc. does not convey any license rights nor the rights of others. Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems intended to support or sustain life, or for any other application in which the failure of the Arizona Microtek, Inc. product could create a situation where personal injury or death may occur. Should Buyer purchase or use Arizona Microtek, Inc. products for any such unintended or unauthorized application, Buyer shall indemnify and hold Arizona Microtek, Inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Arizona Microtek, Inc. was negligent regarding the design or manufacture of the part.
April 2007 * REV - 9
www.azmicrotek.com 10

▲Up To Search▲

Price & Availability of AZ100LVEL33

	To Download AZ100LVEL33 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .